China Factory supplied China plastic product manufacturers and suppliers

Factory supplied China plastic product

Short Description:

✭ This is a plastic part used to fix the PCBA board, in order to keep the PCBA balanced and ensure the stability of the transmission signal. The requirements for this plastic part are very high, and the precision of the parts of the plastic product must be within 0.02mm. So, if several contact surfaces of the PCBA are fixed, the product cannot be draft angle, and the mold must be designed and manufactured in a Slider method.

✭ The high temperature resistant PC material used in this plastic material is a commonly used material for car lights. This material has the advantages of small deformation, good stability, high temperature resistance and cold resistance.

✭ This set of molds adopts the HASCO standard. The Core material is 1.2343 hardened steel. The mold structure is relatively complex structure, need to use exchangeable insert to production four different parts. The product material is PC, and the surface needs to be Polish 600. Product size accuracy requirement is +/-0.02. The mold delivery time is 38 days, and the injection cycle is 27 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.

✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.

Send email to us Download as PDF

Product Detail

We’re committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Factory supplied China plastic product, President of our enterprise, with whole personnel, welcomes all buyers to go to our business and inspect. Let us cooperate hand in hand to help make a very good long run.
We’re committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for China Chemical, Insulator, Further, we’re supported by highly experienced and knowledgeable professionals, who have immense expertise in their respective domain. These professionals work in close coordination with each other to provide our clients an effective range of products.

Mould NO.	CPM-191018
Surface Finish Process	Polish-#600
Plastic Material	PC
Part weight	1.5 g
Design Software	UG
Part size	32.00 X 18.50 X 18.1 mm
Customized	Customized
Application	Electronic
Mould size	296 X 346 X 326 mm

Mould Name	Angle buffer
Mould Cavity	1*2(Use exchangeable insert to get four parts)
Runner	cold runner for Side gate
Standard	Hasco
Mould Material	1.2343/1.2312/1.2767
Mould Life Cycle	1,000,000
Lead Time	38 days
Mould Cycle Time:	27′s
Payment	T T

Project Management

We have 12 Design Engineers with an average of 10 years design experience and a technical college level of education. The team will discuss every new project together and find the perfect solution for it, based on our knowledge and successful experience. We use 3D software to design the mold and Moldflow to verify and optimize the design, so that we can ensure it’s success.

After receiving your PO and part print, we will discuss and recommend any changes we think are necessary to make the part mouldable. We will then provide you with a DFM design report within two days to one week for you to review. We will discuss and then submit the part demoulding method and finalized mould design for your approval, before purchasing and cutting the steel. This process guarantees that we fulfill all of your design requirements.

asfg

Mould Workshop

Medical-(7)
Medical-(9)
Medical-(11)
Medical-(12)
Medical-(13)

Customer visit

Creating value for customers and making it perfect is our philosophy. You will realize greater profits by working together with CPM!

Medical-(3)
Medical-(10)
Medical-(8)

Mould standard

We are experienced in all kinds of steels and fittings of international standard

Medical-(16)

Packaging&Warehousing

cshvjxckv
Chapman maker committed to providing one-stop purchasing service of consumer for Plastic project development, plastic molding, welcomes all buyers to go to our business and inspect. Let us cooperate hand in hand to help make a very good long run.
Chapman maker supplied mold, plastic parts for Auto,Medical, Home appliances, IT,Electrical industry. Further, we have our owned team with rich experience from mold design, injection production, assembly.