Featured Products
-
China Supplier China Customized Aluminum CNC Milling/Machining/CNC Turning Parts for Non-Standard Devices/ Medical Devices/ Optical Lens/Auto Parts/Motor Accessories/Electronics
✭ Our company is very experienced in the field of plastic molds for medical catheters. Not only mold manufacturing, but also medical-grade injection molding. The plastic material used in this medical catheter is very expensive and requires very high quality molds. The inner hole of the product is only 1.27mm in diameter. Our mold inserts are made of SKH51 high-quality material. This material can ensure the tolerance of the small holes and ensure the service life of the inserts pin.
✭ The plastic material of this catheter is a 65-degree soft material. During the injection molding process, it is difficult to demold. Through our technological improvement, our current mold production is smooth and the injection cycle is shortened. At present, our injection molding cycle is 16 seconds, which saves delivery time and cost to our customers.
✭ Our set of molds is made of S136 hardened material, and the life of the mold should reach 1 million times. In the injection molding production process, it is necessary to ensure the accuracy of the product, and ensure that it is stable and firm during the assembly process.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Plastic Chair cover for exported
✭ In addition to the design and appearance of the cushion of a plastic chair, its quality is also very important. The plastic material we use is PP+20GF, which has good toughness and excellent compression resistance.
✭ The mold of this plastic part uses NAK80 mold steel, which has good polishing performance. In order to get a high-quality surface effect and a good texture surface, NAK80 material performs very well. The life expectancy of this model is up to 500,000 times. The water transportation design and strength of the mold are all designed and manufactured on the basis of this life.
✭ The product injection cycle is 42 seconds, and the daily production capacity can reach 850. The short manufacturing cycle has also greatly reduced the cost of the product, and has won more profit margins for our customers.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Plastic glasses OEM parts
The plastic part is an important appearance and function part of the game glasses, and the appearance directly contacts with user. The plastic part is made of nylon PA12 (general), EMS Grivory TR90 (specification), color: black 9208.The mold for this plastic part is made with a two-plate mold. Because of the appearance and functional structure of the plastic parts, the mold design fully considers the external surface that can be protected and the principle of realizing the product function, and use the cold runner two submersible glue in an appropriate way. This method of injecting glue ensures the beautiful appearance of the product. , It can also improve the molding efficiency. The 2-point injection prevents the product from deforming due to the high injection pressure during the injection molding, and the size is unstable, which affects the product quality. This set of injection mold, our mold life is 500,000 shots. If you have similar products, please feel free to contact us. We will be your best partner.
-
Fixed Competitive Price China High Precision Molding Inject Plastic Injection Molding Mold Customized Nylon Plastic Part
✭ With the continuous expansion of the robot market, many robot manufacturing companies have launched very fierce competition. The service life of the robot, reducing noise has become a major technical problem. This part of the small precision servo servo plays a very important role, because each joint of the robot needs a servo to achieve different actions.
✭ Our plastic part is the housing part of the servo steering gear, and the plastic material used is high-performance PA66+30GF material. Under the action of the gears of the servo steering gear, it can ensure that the plastic shell will not deform and remain stable during the movement of the gears. This plastic shell has very high requirements for the accuracy of the mold, especially the dimensional tolerance of the gear positioning hole, to ensure that it is within the tolerance range of 0.005mm. Our mold materials are manufactured using imported materials from Becu and S136.
✭ This plastic shell is composed of three plastic shells, an upper shell, a middle shell and a lower shell. They must be perfectly matched to ensure that the center position of the gear positioning hole is consistent. Therefore, for this kind of precision plastic parts, the mould cavity is only 2, so that the size can be better controlled.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China CNC Machining Service Customized Nylon PA PA+GF PP Peek PU POM ABS Plastic Products CNC Machining Plastic Parts
✭ This plastic part is the main part of the capsule coffee machine, and it is the core part of the capsule coffee machine.
✭ The material used for this plastic part is PA66+45GF, and there are three main plastic parts that need to be assembled with this plastic part. The sliding part of the machine and the disassembly of the capsule coffee are inseparable from this core plastic part.
✭ Its advantages are not easy to deform, good stability, high precision, to ensure that the coffee machine is stable during work and reduce noise.
✭ This mold is our company’s production mold, which mainly provides plastic parts services for our coffee machine manufacturers. The production capacity of this set of molds is 800 per day.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
IOS Certificate China Silicone Rubber (LSR) Mould, LSR Mould for Silicone Silicone Mould
✭ Due to the high demand for this liquid silicone part, we have made 6 sets of LSR molds for our customers in total. The number of cavities in each mold is 4 cavity, and the front and rear templates are made of S136 hard steel material, and the hardness is HRC48-52 degrees.
✭ Due to strict product appearance requirements, the parting line of the product must be controlled within 0.03mm. Our mold processing accuracy must be controlled within the range of 0.005-0.01mm. and its irregular parting surface, it is very difficult for our mold manufacturing. We must ensure that our processing equipment and technology can meet customer requirements. Through 35 days of processing and manufacturing, our mold testing was very successful, and our customers immediately put into mass production.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Supply OEM/ODM China factory
✭ In addition to the design and appearance of the cushion of a plastic chair, its quality is also very important. The plastic material we use is PP+20GF, which has good toughness and excellent compression resistance.
✭ The mold of this plastic part uses NAK80 mold steel, which has good polishing performance. In order to get a high-quality surface effect and a good texture surface, NAK80 material performs very well. The life expectancy of this model is up to 500,000 times. The water transportation design and strength of the mold are all designed and manufactured on the basis of this life.
✭ The product injection cycle is 42 seconds, and the daily production capacity can reach 850. The short manufacturing cycle has also greatly reduced the cost of the product, and has won more profit margins for our customers.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China Custom Silicone Precision Rubber Seal for Medical products
✭ Due to the high demand for this liquid silicone part, we have made 6 sets of LSR molds for our customers in total. The number of cavities in each mold is 4 cavity, and the front and rear templates are made of S136 hard steel material, and the hardness is HRC48-52 degrees.
✭ Due to strict product appearance requirements, the parting line of the product must be controlled within 0.03mm. Our mold processing accuracy must be controlled within the range of 0.005-0.01mm. and its irregular parting surface, it is very difficult for our mold manufacturing. We must ensure that our processing equipment and technology can meet customer requirements. Through 35 days of processing and manufacturing, our mold testing was very successful, and our customers immediately put into mass production.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Factory supplied China Custom Made plastic products
✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.
✭ This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China OEM China High Quality Mold Maker Plastic Injection Mold
✭ This plastic part is the main part of the capsule coffee machine, and it is the core part of the capsule coffee machine.
✭ The material used for this plastic part is PA66+45GF, and there are three main plastic parts that need to be assembled with this plastic part. The sliding part of the machine and the disassembly of the capsule coffee are inseparable from this core plastic part.
✭ Its advantages are not easy to deform, good stability, high precision, to ensure that the coffee machine is stable during work and reduce noise.
✭ This mold is our company’s production mold, which mainly provides plastic parts services for our coffee machine manufacturers. The production capacity of this set of molds is 800 per day.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China plastic OEM supplier
✭ When manufacturing injection-moulded parts from plastics, the mould temperature has a decisive influence on the quality of the parts and the cycle time. Optimum temperature control during the processing of thermoplastics therefore also has a direct influence on the efficiency of the production.
✭ The injection mould is cyclically heated by the injected material. The heat is dissipated by the thermal conduction in the material and in the steel of the mould to the surface of the temperature control channel, where the heat is given off via heat transfer to the circulating heat transfer medium (water or oil). The temperature control unit dissipates the heat of the heat transfer medium and returns the cooled medium to the circulation.
✭ Our set of molds is made of S136 hardened material, and the life of the mold should reach 1 million times. In the injection molding production process, it is necessary to ensure the accuracy of the product, and ensure that it is stable and firm during the assembly process. Make our electronic part more stable.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Factory directly China plastic cover mould maker
✭ With the continuous expansion of the robot market, many robot manufacturing companies have launched very fierce competition. The service life of the robot, reducing noise has become a major technical problem. This part of the small precision servo servo plays a very important role, because each joint of the robot needs a servo to achieve different actions.
✭ Our plastic part is the housing part of the servo steering gear, and the plastic material used is high-performance PA66+30GF material. Under the action of the gears of the servo steering gear, it can ensure that the plastic shell will not deform and remain stable during the movement of the gears. This plastic shell has very high requirements for the accuracy of the mold, especially the dimensional tolerance of the gear positioning hole, to ensure that it is within the tolerance range of 0.005mm. Our mold materials are manufactured using imported materials from Becu and S136.
✭ This plastic shell is composed of three plastic shells, an upper shell, a middle shell and a lower shell. They must be perfectly matched to ensure that the center position of the gear positioning hole is consistent. Therefore, for this kind of precision plastic parts, the mould cavity is only 2, so that the size can be better controlled.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
