Featured Products
-
China Mold Manufacturer Making PP ABS Injection Molding OEM ODM Household Plastic Stool Injection Molding
✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.
✭ This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
China Plastic Injection Parts Automobile Parts Mold Maker
✭ This plastic part is a part of a car from a French customer. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Lifters structures. The product material is PA66+30GF, and the surface needs to be polished #600. The mold de
livery time is 35 days, and the injection cycle is 32 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the French injection molding factory.
✭ If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.
-
One of Hottest for China Factory Good Price Plastic Mould Injection Mould Maker for Mould Plastic
✭ This plastic part is the main part of the Control Unit and Charge Connector bottom cover.
✭ The material used for this plastic part is ABS fireproof Materials, This plastic part is the appearance part of the product and an important assembly part. It is fixedly connected to the middle shell with 6 brass nuts, and needs to pass a 5-meter drop test.
✭ This ABS fireproof material has reached the V0 level, ensuring safety and stability during on-board charging. The plastic mold for this plastic part is made by a three-plate mold. cold runner in the middle point, this advantage can make the whole product injection uniformly and not easily deformed.
✭ This set of injection molds, our design life is 500,000 times. The fixing between the products is designed with overmold brass nuts. The copper nut is placed in the mold and then injected. This ensures that the copper nut can be more firmly fixed to the plastic part.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
high quality for China Plastic Injection Mould for Home Appliance Parts & Electronic Products
✭ The plastic back cover of this fan is made of PA66+30GF plastic material. This plastic material is resistant to corrosion and aging, and is suitable for use in various climates.
✭ This set of plastic molds are exported to European countries, and the mold life needs to reach 500,000 times. The mold material uses 1.2343 hardened material, and the mold spark processing uses graphite copper. The mold structure is made with a three-plate mold, and the injection cycle is 32 seconds. These series of parameters are all in consideration of customer cost for mold design and manufacturing, so as to win as much production profit as possible for customers.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Well-designed China Customized plastic product
The plastic part is an important appearance and function part of the game glasses, and the appearance directly contacts with user. The plastic part is made of nylon PA12 (general), EMS Grivory TR90 (specification), color: black 9208.The mold for this plastic part is made with a two-plate mold. Because of the appearance and functional structure of the plastic parts, the mold design fully considers the external surface that can be protected and the principle of realizing the product function, and use the cold runner two submersible glue in an appropriate way. This method of injecting glue ensures the beautiful appearance of the product. , It can also improve the molding efficiency. The 2-point injection prevents the product from deforming due to the high injection pressure during the injection molding, and the size is unstable, which affects the product quality. This set of injection mold, our mold life is 500,000 shots. If you have similar products, please feel free to contact us. We will be your best partner.
-
OEM Factory for China PP PC PS ABS Injection Molding Plastic Parts / Inject Mold Plastic Parts / CNC Machining Plastic Injection Molding Manufacturers
✭ This is a sealed plastic part inside the car, using high temperature and cold resistant PA66+30% plastic material. The working environment temperature of this part is between -40 and +100 degrees. It is resistant to outdoor weathering and meets Volkswagen’s 50185 standard.
✭ This plastic part is a part of a Oil filters Plastic ccessories from a Germany customer. The biggest difficulty of this part is that its wall thickness is only 0.45mm. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Becu core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-24. Product size accuracy requirement is +/-0.05. The mold delivery time is 45 days, and the injection cycle is 12 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Fast delivery China OEM Plastic Injection Mold Factory and Supplier
✭ We can make all kinds of helmet mould as customer’s require,the quotation can be provide based on customer’s drawing or sample. our mould are both excellent in quality and reasonable in price.
✭ This plastic part is a part of a Bicycle helmet from a USA customer. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel. The mold structure is relatively simple, with four independent core inserts structures. The product material is PP plastic material, and the surface needs to be Polish600. The mold delivery time is 45 days, and the injection cycle is 37 seconds. The structure of this mold is complex, with four large sliders and two large lifters. The ejection adopts inclined jacking plus push block ejection.
✭ The mold transportation design needs to be evenly divided to ensure that the product can be uniformly cooled. Make the product achieve high-precision size and high-quality appearance.
✭ If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.
-
ISO certs china mold manufacturer
✭ The filter media developed by customer are multi-layered compounds made from fibre glass or synthetic materials which allow optimal interaction with the bio fuels and carbon particles dissolved in the oil. They guarantee the highest motor performance even with the introduction of new «long life» oils, additives, mineral and non-mineral oils and their consequent degradation. The structure of the new and traditional filter media ensures a high permeability and therefore minor load losses in the engine lubrication system.
✭ This plastic part is a part of a Oil filters Plastic ccessories from a Italy customer. This set of molds adopts the HASCO standard. The Core material is 1.2344 (ESR)hardened steel. The mold structure is relatively simple, with four independent core inserts structures. The product material is PA6+30GF, and the surface needs to be VDI-33. The mold delivery time is 40 days, and the injection cycle is 38 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Italy injection molding factory.
✭ If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.
-
China ODM OEM Manufacturer Designer Custom Plastic Injection Mould for Plastic Product
✭ This is a plastic part used to fix the PCBA board, in order to keep the PCBA balanced and ensure the stability of the transmission signal. The requirements for this plastic part are very high, and the precision of the parts of the plastic product must be within 0.02mm. So, if several contact surfaces of the PCBA are fixed, the product cannot be draft angle, and the mold must be designed and manufactured in a Slider method.
✭ The high temperature resistant PC material used in this plastic material is a commonly used material for car lights. This material has the advantages of small deformation, good stability, high temperature resistance and cold resistance.
✭ This set of molds adopts the HASCO standard. The Core material is 1.2343 hardened steel. The mold structure is relatively complex structure, need to use exchangeable insert to production four different parts. The product material is PC, and the surface needs to be Polish 600. Product size accuracy requirement is +/-0.02. The mold delivery time is 38 days, and the injection cycle is 27 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the Germany injection molding factory.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
Auto parts manufacturer
✭ This plastic part is a part of a car from a French customer. This set of molds adopts the HASCO standard. The Core material is 1.2343 (ESR)hardened steel.
✭ The mold structure is relatively simple, with two Lifters structures. The product material is PA66+30GF, and the surface needs to be polished #600. The mold de
livery time is 35 days, and the injection cycle is 32 seconds. The mold was tested only twice, and the customer asked us to arrange an export to the French injection molding factory.
✭ If you have similar products, please feel free to let us make molds for you. Our quality and service are the best.
-
Factory Customized China plastic tool
✭ In addition to the design and appearance of the cushion of a plastic chair, its quality is also very important. The plastic material we use is PP+20GF, which has good toughness and excellent compression resistance.
✭ The mold of this plastic part uses NAK80 mold steel, which has good polishing performance. In order to get a high-quality surface effect and a good texture surface, NAK80 material performs very well. The life expectancy of this model is up to 500,000 times. The water transportation design and strength of the mold are all designed and manufactured on the basis of this life.
✭ The product injection cycle is 42 seconds, and the daily production capacity can reach 850. The short manufacturing cycle has also greatly reduced the cost of the product, and has won more profit margins for our customers.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
-
High quality China Manufacturing plastic product
✭ This plastic part is the main part of the Control Unit and Charge Connector bottom cover.
✭ The material used for this plastic part is ABS fireproof Materials, This plastic part is the appearance part of the product and an important assembly part. It is fixedly connected to the middle shell with 6 brass nuts, and needs to pass a 5-meter drop test.
✭ This ABS fireproof material has reached the V0 level, ensuring safety and stability during on-board charging. The plastic mold for this plastic part is made by a three-plate mold. cold runner in the middle point, this advantage can make the whole product injection uniformly and not easily deformed.
✭ This set of injection molds, our design life is 500,000 times. The fixing between the products is designed with overmold brass nuts. The copper nut is placed in the mold and then injected. This ensures that the copper nut can be more firmly fixed to the plastic part.
✭ If you have similar products, Please do not hesitate to contact us. We will be your best partner.
